The perfect level measurement method for chemical and industrial applications.

Application

The WEKA tank level instruments offer a reliable possibility to check the level. In addition, they are suitable as position transmitters for stroke movements. The sensors are built according to customer specifications and have proven in a wide range of industrial and chemical applications as well as in a large number of special applications for many years.

Function and designs

Depending on the level or stroke, the float that is equipped with a magnet actuates reed contacts in the switching pipe. The sensor operates according to the voltage divider principle and provides voltage (XM-xxx) or current (XT-xxx) that is proportional to the float position as an output signal. These tank level instruments are available with a resolution of either 5 mm or 2.5 mm.

In connection with the corresponding indicating meters, analog or digital indicators, for example, can be operated, visual or acoustic alarms triggered or computers fed.

Quality assurance by 100 % routine inspection and testing

Especially for electrical products, safety testing is an absolute must in order to be able to rule out possible electric shock hazards. This is why we test each individual sensor prior to its delivery as to if it is safe and functions properly. Functional verification is recorded, logged and delivered together with each device.

Wide variety of our tank level instruments

Whether with cable out, plug-in connector or terminal box; in order to ideally supplement your level indicator, you select the version which best suits your application. Thanks to the large number of different connection versions, a suitable installation option can be found for each tank. Even installations from below are no problem when using the WEKA system.

For most applications, you will find a suitable device from our standard program. Again and again, however, also customized solutions are required for special operating conditions. Our strengths include the development, production and testing of customized solutions to suit your individual requirements. Please do not hesitate to contact us, we will be happy to advise you.

XM/XT-825E

Resolution

2.5mm

Tube dia.

13mm

Material

316/316L/316Ti

Output

Current/Voltage

Minimum desity

0.60 g/cm3

XM/XT-800E

Resolution

5mm

Tube dia.

13mm

Material

316/316L/316TI

Output

Current/Voltage

Minimum density

0.60g/cm3

XT-800R

Application Area

Industrie, Chemie

Resolution

5 +/- 2 mm

Min. Mounting Length

400 mm

Max. Mounting Length

3000 mm

Minimum density

0.60g/cm3

XM/XT-800E-PVDF

Resolution

5mm

Tube dia.

20mm

Material

PVDF

Output

Current/Voltage

Minimum density

0.77 g/cm3

Weitere Produkte der WEKA AG